Brief introduction of CH type Trough Mixer:
The CH type U-shape Mixer has advantages of new-designed, high efficiency, energy saving, convenient and fast of charging and discharging. The mixing part can be single shaft and double shafts, when propeller rotates, material rolling up and down, blade through the material at the same time, the mixing tank to left and right sides of the pushing force with certain Angle, the mixing tank material can't stop in any corner, so that the material is mixing sufficiently. The machine adopts end face seal and seal adjustment nut, compensation of axial pressure sealing method.
Application of CH type Trough Mixer:
Trough mixing machine is widely used in medicine, food, health care products, chemicals, fertilizers, veterinary medicine, pigment, metallurgy, refractory material, mining, smelting, building material, feed, breeding, a mixture of biological engineering. The machine is of wide adaptability, the mixture of raw materials, fine and super fine powder, etc. Various kinds of particles, fibre or a combination of flake material has good adaptability. Especially suitable for uniform demand is high, material proportion difference of material blending.
Medical medicine: capsules, traditional Chinese medicine dressing, a mixture of powder or granule of Chinese herbal medicine, etc.
Nurture feeding material: can be used for all kinds of fish feed, poultry feed, wild animal feed, birds feed etc
Food tastes: being is the mixture of various paste class, spices, additive, vitamin, etc.
Cosmetics: daily chemical products, facial mask, foundation, toothpaste, etc.
Fuel: all kinds of firecrackers, fireworks and so on a mixture of raw materials.
Mineral ores: the mixture of various kinds of powder or granular ore, etc.
Structure characteristics of CH type Trough Mixer:
1, This machine is the overall frame, solid structure, smooth operation, impeller and contact point are made of stainless steel material, good corrosion resistance, maintain the quality of materials and cleaning, does not change color.
2, The transmission mechanism adopts the worm gear and worm drive directly, without too much noise when using, and have enough oil, can get good lubrication. Trough hybrid organization build instructions.
Introduction of structures:
1, the mixing speed reducer
The speed reducer is for the main transmission structure of mixing machine, it is located in the machine on the right side, by the device in a machine while working machine motor to drive through the triangle worm, worm gear, at 1:40 slowdown driven mixer. Worm shaft is hollow and equipped with fixed key, can make the impeller free installation. On the top of the reducer is equipped with two ring screw for installation, install and use. On the end cover is equipped with a screw for high-speed impeller localization, in has been adjusted when delivery from factory, generally no longer in use.
2. Mixing tank
Mixing tank is U shape, adopt stainless steel, built-in impeller
3. Dumping material reducer
Dumping material reducer is used to control the orientation Angle of mixing tank, it is located on the left side of the machine, by the device while working within the frame of the motor through the triangle of worm and worm gear drive, drive the mixing tank in certain Angle range, so hybrid material poured out at a time.
4. Stand and motor device
Stand is a whole structure, the motor installed on the flexed board on both sides of stand, the fluctuation of the motor can be used to adjust the screw, make certain elastic of the triangle, keep the momentum.
Technical specification of CH type Trough Mixer:
Model |
CH50 |
CH100 |
CH150 |
CH200 |
CH300 |
CH400 |
CH500 |
CH600 |
Working volume(L) |
50 |
100 |
150 |
200 |
300 |
400 |
500 |
600 |
Rotating speed (rpm) |
24 |
24 |
24 |
24 |
24 |
24 |
24 |
24 |
Turning angle |
<105 |
<105 |
<105 |
<105 |
<105 |
<105 |
<105 |
<105 |
Mixing motor(kw) |
1.5 |
2.2 |
3 |
4 |
5.5 |
5.5 |
7.5 |
11 |
Dumping motor(kw) |
0.37 |
0.55 |
0.55 |
0.75 |
1.1 |
1.1 |
1.5 |
2.2 |
Machine size (mm) |
1200* 500*950 |
1400* 580*1000 |
1800* 600*1150 |
2000* 650*1200 |
2200* 700*1250 |
2280* 750*1250 |
2350* 800*1300 |
2400* 850*1350 |