Introductioin of sludge filter press:
Sludge filter press is mainly used to remove the impurities in the sludge, such as, mud, corrosion inhibitor, sulfide and other impurities and suspended solids, avoiding the whole system accumulation, affecting the water quality after the treatment of sludge. The structure of sludge filter press is mainly composed of five major parts, frame, automatic pulling board, filtration, hydraulic and electrical control. According to different requirements, but also may increase the liquid plate, turn over the plate, storage bucket, washing system, filter cloth inclining frames, etc.
Working principle of sludge filter press:
The liquid to be filtered is conveyed by a conveying pump under pressure from the feeding hole of the thrust plate into each filter chamber, through the filter cloth, the solids are retained in the filter chamber, and gradually forms a cake; the liquid is discharged out of the machine through the water outlet. With the proceeding of filtration process, the cake filtration begins, the cake thickness increases gradually, and the filtration resistance increases. When the filter cake reaches a certain thickness or full box, stop filtering. Open the plate and frame, remove the cake, clean the filter cloth, reassemble and proceed to the next cycle.
Applicatioin of sludge filter press:
Municipal sludge: sewage sludge, sewage treatment plants, sludge, food factories, breweries, beverage plants, sludge and so on.
Chemical sludge: electroplating sludge, pharmaceutical plant sludge, leather sludge, and other sludge produced by chemical plants.
Industrial sludge: coal washing plant sludge, printing and dyeing plant sludge, paper mill sludge, oil sludge, tailings, sludge and so on.
Specification of Sludge filter press:
